Mono-wing labyrinth type drip irrigation belt production line

drip irrigation belt production line 1. irrigation equipment 2. material: regenerated material 3.Good quality with low cost

 Mono-wing labyrinth type drip irrigation belt production line

Features of Production Line

Inverter control for main motor, forming machine and haul off machine, save power, even running and low noise. To measure Semi-finished tube diameters is controlled by CCD chip and MCU min chip and to PWM signal. Fast speed, stability and good control. Main machine, speed reducer are adopted to hard gear speed reducer, screw, barrel material is 38CrMoAl. With nitrogen treatment; hardness: HV800-900, during, high plasticization. AI-cast heater, automatic fan cooling for temperature controlling. Forming wheel is made of excellent steel, Anti-corrosion, long life.

Drip Irrigation Tube Application:Lt’s suitable to arid, half arid area climatic conditions, such as, Xingjian, Qinghai, Xizang, Neimeng, Shanxi etc. Apply to green house, various of crops, Orchard, vineyard, cotton etc. field.Production Main Technique Data

Production Model	SJ-50/30	SJ-55/30
Extrusion Output(kg/h)	30kg/h	40kg/h
L/D	30:1	30:1
Main Motor Power	11kw	15kg
Haul off Power	1.1kw	1.1kw
Forming Machine Power	1.5kw	1.5kw
Heat Power	12kw	18kw
Installation Dimension	12m*3m*2m	13m*3m*2m
Weight(kg)	2800kg	3100kg

Forming Wheel, Specification and Data

O.D of Mould	382
Installation Dimension Center Distance (m.m)	≥200
Output (m/min)	30-40
Two Position Wind
Single Roller Wind(m)	500-2000
Drip Tape Intemal Diameter (m.m)	12-20
Drip Tape Wall Thickness	0.16-0.24
Drip Flow(L/n)	1.8-3.2
Flow Error	±5%
Work Pressure (Mpa)	0.1-10.

Mono-wing labyrinth type drip irrigation belt production line